 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| HPM Series * Miniaturized Solid Aluminium Electrolytic Capacitor with Conductive Polymer * Ultra ESR * High Ripple Current * Switchmode Power Supplies, Computer, DC/DC Converter * Noise Suppression in Smoothing / High-Frequency Circuits lower ESR miniaturized CD 284 XY HCP HPM Item Operating Temperature Range (C) Voltage Range (V) Capacitance Range (F) Capacitance Tolerance (20C, 120Hz) Surge Voltage Leakage Current (A) Dissipation Factor (20C, 120Hz) Equivalent Series Resistance (20C, 100kHz) Temperature Characteristics Characteristics -55 ~ +105 2,5 ~ 6,3 560 ~ 1 500 20% Rated Voltage x 1,15 The initial specified value or less (20C, 2min) The initial specified value or less The initial specified value or less Z (+105C) / Z (+20C) 0,75 Stability at 100kHz Z Z (-55C) / Z (+20C) 1,25 Stability at 100kHz 2 000h, Rated voltage applied at 105C Capacitance change : within 20% of the initial measured value Dissipation Factor Tan : 150% of initial specified value ESR: 150% of initial specified value DC Leakage Current : the initial specified value 500h, Rated Voltage applied at 60C, 90~95% RH Capacitance change : within 20% of the initial measured value Dissipation Factor Tan : 150% of initial specified value ESR: 150% of initial specified value DC Leakage Current : the initial specified value 1 000 cycles at 105C, with UDC = 1,15 UR ( 30sec load / 330sec discharge) Capacitance change : within 20% of the initial measured value Dissipation Factor Tan: 150% of initial specified value ESR: 150% of initial specified value DC Leakage Current : the initial specified value Load Life Moisture Resistance Surge Voltage Characteristics Ratings for HPM Series Polymer VDC Code Rated Capacitance Max ESR 20C, 100kHz Max Ripple Current 105C, 100kHz (mArms) 4 400 5 600 5 600 5 600 5 600 5 600 5 600 Dissipation Factor 20C, 120Hz 0,12 0,12 0,12 0,12 0,12 0,12 0,12 Leakage Current Size O DxL (mm) 8x8 8x8 8x8 8x8 8x8 8x8 8x8 (V) 2,5 0E 4 0G 6,3 0J (F) 560 820 1 000 1500 560 820 680 (m) 7 7 7 7 7 7 7 (A) 500 513 625 750 560 820 857 Custom products are available on request. 82 Direct Contact & Support: Jianghai Europe GmbH +49 (0)2151-652088-0 info@jianghai-europe.com www.jianghai-europe.com v2006.2 Part Number System Order Code SMD, Radial, Snap-In EC Technology EC = Electrolytic Capacitor PC = Polymer Capacitor R Terminal Type SMD Radial =V =R 1C Rated Voltage Code For coding please refer to the pages of ratings PT Series Code CD VS CD VH CD VZ CD 261 CD 262 CD 26 CD 269 CD 281 CD 28 CD 287 CD 28L CD 29 CD 29 CD 29 CD 296 CD 297 CD 299 101 Capacitance Code (in F) 1,0 = 010 100 = 101 1 000 = 102 M Capacitance Tolerance = M SMD: =K Taped FF Lead Form 2 Terminal/ Pitch Size = FF 0611 Dimension 4x7 = 0407 = 0511 = 3580 JE xxxxx for Specials only = BS = VH = VZ = LK 0,47 = R47 20% 10% Terminal = T2 2,0mm 2,5mm 3,5mm 5,0mm 7,5mm = 20 = 25 = 35 = 50 = 75 5x11,5 35x80 Snap-In = S 2,2 = 2R2 +30 / -10% = Q +50 / -10% = T Radial: Long Lead = LL 6,3x11,5 = 0611 = CB = CC CD 261X = QX Cut 5,0mm Cut ,mm 45x100 = 45100 = QM 10 000 = 103 = BK = PH = LL = XY = GC = QL = BZ = BW = BC = KC = BB = PG Cut 4,0mm Cut 3,5mm Cut 3,0mm = CD = CE = CF 10,0mm = 10 12,5mm = 12 on request: alternative lead forms (axial, 90 - angle, others) Snap-In: 4,0mm Pin Length Soldering Pin preferred = T4 = S4 2 Pin 3 Pin 4 Pin 5 Pin = P2 = P3 = P4 = P5 6,mm Pin Length = T6 CD 29D = HR CD 29H = QH CD 29L HCP HPM HVC = QL = CP = PM = VC Technical Specification SMD Type Dimensions O DxL x , x , 6, x, 6,x 7,7 8 x 10, 8 x 11,8 10x10, 10x12,7 A B C E L W 1,8 4,3 4,3 1,0 5,4 2,1 5,3 5,3 1,3 5,4 2,4 6,6 6,6 2,2 5,4 2,5 6,6 6,6 2,2 7,7 2,9 8,3 8,3 3,1 10,5 2,9 8,4 8,4 3,1 11,8 3,2 10,3 10,3 4,5 10,5 3,2 10,4 10,4 4,5 12,7 in mm 0,5 - 0,8 0,7 - 1,1 Taping Dimensions Size (DxL) w 0, A 0,2 B 0,2 P 0,1 t2 0,2 F 0,1 t1 0,1 4 x 5,4 5 x 5,4 6,3 x 5,4 6,3 x 7,7 8 x 10,5 8 x 11,8 10 x 10,5 10 x 12,7 12,0 12,0 16,0 16,0 24,0 24,0 24,0 24,0 5,0 6,0 7,0 7,0 8,7 8,7 10,7 10,7 5,0 6,0 7,0 7,0 8,7 8,7 10,7 10,7 8,0 12,0 12,0 12,0 16,0 16,0 16,0 16,0 5,8 5,8 5,8 8,4 11,0 12,3 11,0 14,0 5,5 5,5 7,5 7,5 11,5 11,5 11,5 11,5 0,4 0,4 0,4 0,4 0,5 0,5 0,5 0,5 in mm Soldering Profile (Aluminium Electrolytic Capacitors) Diameter w D 4; 5 6,3 8; 10 Polymer 14 1 18 1 25 1 25 1 50 1 50 1 50 1 80 1 in mm Allowable Range of Peak Temperature Size T (C) t (second) t 1 (second) O 4 ~ 6,3 O 8 x 10,5 O 10 x 10,5 250 240 235 90 90 60 40 30 30 For more details or Soldering Profiles of Radials or Polymer-Capacitors please contact our local Sales Offices. v2006.2 8 Direct Contact & Support: Jianghai Europe GmbH +49 (0)2151-652088-0 info@jianghai-europe.com www.jianghai-europe.com Part Number System Technical Specification Radial Type Dimensions for loose, long-lead type, (bulk) Order Code: LL L OD F L7 L 11 3 1 4 1,5 5 2,0 1,0 6,3 2,5 0,45 8 3,5 5 2,0 6,3 2,5 0,5 8 3,5 10 12,5 16 5,0 0,6 2,0 7,5 0,8 18 20 22 1,0 25 12,5 10,0 O d 0,4 aMax in mm Dimensions for Ammopack taping Order Code: FF (FD) Code Case Range OD 4~6 Dimensions F 0,5 2,5 P 0,1 12,7 A 8 13 18,5 3,5 12,7 Form A Form L (max) H 0,75 Ho 0,5 13 18,5 - Ammopack 4~8 7 17,5 Form B FF 5 ~ 6,3 13 18,5 16 12,7 B 8 22 20,0 5 10 22 18,5 A 12,5 27 18,5 - 15,0 Form C FD 12,5 27 18,5 - 25,4 C FF 16 ~ 18 27 18,5 - 7,5 30,0 in mm Dimensions for loose, short cut leads, (bulk) Order Code: CC (CB,CD,CE,CF) Straight Lead Bended Lead 2.5max Code I preferred CB 5,0 0,5 CC 4,5 0,5 CD 4,0 0,5 CE 3,5 0,5 CF 3,0 0,5 in mm Direct Contact & Support: Jianghai Europe GmbH +49 (0)2151-652088-0 info@jianghai-europe.com www.jianghai-europe.com v2006.2 9 |
Price & Availability of HPM
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |